Digital Zoom; Using The Intercom (Two-Way Audio) - Lorex WIRELESS HOME MONITORING SYSTEM User Manual

Using the system

Digital Zoom

The Digital Zoom feature allows you to zoom in 2x on your cameras during live viewing. This is
useful if you need a closer look at something happening far away from the cameras.
To use digital zoom:
1 Select the desired camera in full-screen mode (press UP/DOWN to select the channel) and
press the ZOOM button on the rear panel of the wireless receiver to zoom in.
Zoom button
2 When Digital Zoom is activated, a x2 icon appears on the screen. Press UP/DOWN/LEFT/
RIGHT on the front panel of the monitor to look at different parts of the image.
Press UP/DOWN/LEFT/RIGHT to
look at different parts of the image
3 Press the ZOOM button again to exit digital zoom.

Using the Intercom (two-way audio)

Use the Intercom feature for two-way communication between the wireless receiver and the
camera. Talk to the person at the camera from behind closed doors for added security.
NOTE: Please make sure the camera(s) is properly connected prior to using the Intercom.
To use the Intercom:
1 Select the desired camera in full-screen mode (press UP/DOWN to select the channel) and
press and hold the
2 Talk in a normal speaking voice close to the LCD screen (approximately 12 in. / 30 cm).
3 Release the
12
button. An audio icon appears on-screen.
button to hear a response from the camera.
Zoom is activated