Auto Mute; Format Memory - Lorex WIRELESS HOME MONITORING SYSTEM User Manual

To select the TV system:
1 Press , then press RIGHT/LEFT to
select Settings and press OK.
2 From the Settings menu, select Video
Output and press OK.
3 Select NTSC (North America) or PAL (UK/
Europe) and press OK to save.
4 Press until all menus are closed.

Auto Mute

The Auto Mute feature will automatically
mute audio from the cameras when the
level of sound detected is low. This is useful
if you wish to avoid playing white noise on
the receiver, but still want to hear audio if
something happens.
To enable Auto Mute:
1 Press , then press RIGHT/LEFT to
select Settings and press OK.
2 Select Auto Mute and press
3 Select ON and then press OK to save
changes.
4 Press until all menus are closed.
1
2
3
4
5
OK
.

Format Memory

Use the Format Memory menu to format
the SD card. It is highly recommended to
format the SD card prior to initial
recording.
To format the SD card:
ATTENTION
Formatting erases all data on the SD card.
This step cannot be undone.
Insert the SD card into the SD card slot on
the wireless receiver until you hear a
"click." Please insert the card according to
the diagram on the panel.
Press , then press RIGHT/LEFT to
select Settings and press OK.
Select Format Memory and press OK.
Select Yes and press OK.
A message appears to confirm formatting.
Select Yes and press OK again to confirm.
Please allow a few moments for formatting
to finish. Formatting time will vary
depending on the size of the SD card.
Settings
35