Setting The Time - Lorex WIRELESS HOME MONITORING SYSTEM User Manual

Setting the time

Setting the time
It is highly recommended to set the time on the system
prior to recording. You need to set
time in order to use Schedule Recording.
To set the time:
1 Press to open the main menu. Press left and
right to select Settings and press the OK button.
2 Select Date & Time and press the OK button.
3 Press RIGHT/LEFT to move the cursor; press UP/
DOWN to change the year, month, day, hour, minutes,
and seconds.
NOTE: The system uses a 24-hour clock only.
4 Press OK to save your settings.
5 Press to close any remaining menu windows.
NOTE: There is no daylight savings time (DST) setting
on the system. DST must be set manually if
necessary.
14
the correct date and
2012/09/22
13:36:49
Date & Time menu
Date and time