Two-Way Audio Volume; Using Av Output - Lorex WIRELESS HOME MONITORING SYSTEM User Manual

Two-way audio volume

The two-way audio volume is different from the alarm/buzzer volume found in the Main Menu
( >Settings>Alarm Volume).
To change two-way audio volume:
• From live viewing, press
system volume.
• The volume icons on the screen indicate the volume of sound coming from the cameras.
NOTE: You cannot adjust the volume of the camera speakers.
2-way audio volume

Using AV output

Use the included AV cable to connect the system to a TV for viewing on a larger screen
To enable AV output:
1 Connect the single end of the AV cable to the AV Out port on the rear panel of the wireless
receiver. Connect the yellow and white RCA ends to matching inputs on your TV. Select the
corresponding input on your TV (commonly referred to as AV, Input, Video, etc.).
AV button
2 Press the AV button on the rear panel to switch the wireless receiver to AV mode. The monitor
will turn off. After a few seconds, the image from the monitor will be displayed on the TV.
NOTE: If you need to change the AV output to PAL format (for European TV's), see "Video
Output" on page 34.
to increase the system volume or press
Using the system
to decrease the
AV Out port
13