Motion Detection; Screen Saver With Motion Recording - Lorex LIVE LW2710 Series Instruction Manual

Using the System

Motion Detection

With the Screen Saver activated, motion detection is enabled on the system. When motion
is detected by one of the cameras, the LCD receiver will display the triggered camera in
single-channel full-screen, and the motion alarm will beep, but the system will not record.
When the motion trigger is finished, the system will return to Screen Saver mode.
NOTE: Unless the REC stamp appears on-screen, the system is NOT recording.
The Screen Saver displays the triggered camera when motion is detected.

Screen Saver with Motion Recording

You can also enable Motion Recording to function with the Screen Saver.
To enable Screen Saver with Motion Recording:
1 From live viewing, press the Motion button on the remote."AUTO REC" appears on the LCD
receiver.
2 Press the Scan/Del button to enable the Screen Saver. "SCAN" appears on the LCD receiver.
• When motion is detected by one of the cameras, the system will display the triggered camera
on-screen, the alarm will beep, and the system will record.
• When motion recording is finished, the system will return to Screen Saver mode.s
NOTE: You can set the length of motion recording from the Record Menu. For details, see
"Record Time" on page 24.
14