Settings; Alarm Volume; Video Output - Lorex WIRELESS HOME MONITORING SYSTEM User Manual

Settings

Settings
Use the Settings menu to set the system
time, change display options, and format
the SD card.
The Settings menu contains the
following sub-menus:
• Date & Time: Set the date and time on the
system. For details, see "Setting the time"
on page 14.
• Alarm Volume: Increase/decrease the
alarm or button volume.
• Video Output: Select the TV system (NTSC/
PAL) for audio/video output.
• Auto Mute: Automatically mute audio from
the cameras when the level of sound
detected is low.
• Format Memory: Format the SD card.
• Default Settings: Restore the system to
factory settings.

Alarm Volume

Use the Alarm Volume menu to increase /
decrease the volume of the buzzer when
motion is detected by the camera(s). The
Alarm Volume also controls the volume of
the 'beep' when you press buttons on the
wireless receiver. If you want to turn off the
buzzer or button sounds, turn the Alarm
Volume to the minimum setting.
34
• If using AV out, changing the system alarm
volume will also affect the level of audio
output.
To increase/decrease alarm
volume:
1 Press , then press RIGHT/LEFT to
select Settings and press OK.
2 Select Alarm Volume and press OK.
3 Press RIGHT to increase the alarm
volume, and press LEFT to decrease the
alarm volume. Set the volume all the way
to the left to disable the alarm buzzer and
button sounds.
4 Press OK to save your settings.
5 Press until all menus are closed.

Video Output

Use the AV out menu to select the TV
system for the wireless receiver.