Manual Recording; Motion Recording - Lorex LW2960 Series User Manual

10 Recording
5. Select the start time and end time of the schedule you want to delete. Move the joystick
left / right to move the cursor, then move the joystick up / down to change the start and
end time.
NOTE
The time uses a 24-hour clock.
6. Select which days of the week that use the schedule you want to delete. Move the joy-
stick left / right to move the cursor, then push the joystick to include or dismiss a day.
7. Move the joystick left / right to select Delete and push the joystick to confirm.
8. Press until all menus are closed.
NOTE
If you delete a recording schedule during a scheduled recording time, the camera(s) will continue to
record video for a short period afterwards. The system checks for changes in recording schedules
every half hour and will eventually stop recording if a schedule has been deleted.

10.3 Manual Recording

Manual recording allows you to manually start and stop recording on any of the cameras.
You can also record while in digital zoom mode. For details on using digital zoom, see 8.4
Digital Zoom, page 17.
When should I use manual recording?
• Recording of unexpected events or emergencies.
NOTE
Manual recording will override schedule recording. The system checks for active recording schedules
every half hour and will eventually resume schedule recording after manual recording is stopped.
To enable manual recording:
1. Press until the channel you want to record is displayed.
2. Press to begin manual recording on the channel you are currently viewing.
A recording indicator (
peat steps 1–2 to enable manual recording on other channels. The system can record
video from up to 4 cameras at a time.
3. Press again to stop recording. The new recording icon (
LCD receiver indicating a new file is on the microSD card.
CAUTION
Do not remove the microSD card while the system is recording. Disable all recording on the system be-
fore ejecting the microSD card.

10.4 Motion Recording

Use motion recording to have the system record only when motion is detected by one of
the cameras. Video is recorded from any connected camera that detects motion. The sys-
tem supports 5 second pre-recording, meaning that the system will record 5 seconds of
#LX400011; r. 2.0/24200/24203; en-US
) appears on screen to indicate the system is recording. Re-
) will appear on the
25