Receiver overview
LED Indicators on the LCD receiver
Use the LED indicators on the LCD receiver to observe the status of the receiver, cameras, and
SD card.
The blue lights indicate the following:
• NEW: A new video file has been recorded to the SD card.
• FULL: The SD card is full.
NOTE: The "Full" light will only appear if Overwrite is disabled. For details, see "Enabling/
disabling overwrite" on page 22.
• MOTION: Motion detection recording is enabled.
• SCAN: Screen Saver mode ("Scan" mode) is enabled.
8
NEW
FULL
MOTION
SCAN
LED indicators