Installing The Receiver - Lorex LW2760 Series User Manual

4

Installing the Receiver

Step 1 of 3: Raising the antenna
For best reception, raise the antenna to point directly upward.
Step 2 of 3: Turning on the receiver
1. Connect the cable from the power adapter to the 5V DC port on the side panel of the
receiver. Plug in the power adapter to an outlet or surge protector
2. Slide the power switch on the side panel to the ON position to power the receiver on.
Tips:
• Place the receiver in a location that will have a clear reception to your camera. Try to
maintain line-of-sight and minimize the number of obstructions between the camera
and receiver.
• Adjust the antenna on the receiver as necessary to provide the clearest reception.
Step 3 of 3: Inserting the SD card
The SD card allows you to store video footage captured by the camera. You should always
format the SD card prior to initial recording. For details, see 9.1 Format Memory, page 21.
• Push the SD card into the SD card slot on the side panel of the receiver until you hear a
"click." The card will not be flush when completely inserted.
#LX400077; r.35258/35258; en-US
9