Warning - Emerson SOUTHTOWNE CF4900BS00 Owner's Manual

BP7485 Southtowne CF4900
6.3
Screw the two 50-watt (maximum) halogen mini
candelabra base bulbs in the light kit assembly sockets
(Figure 21).
NOTE: Do not touch halogen mini candelabra base
bulb with bare hands. Fingerprints may result in
shorter bulb life. Remove fingerprints with rubbing
alcohol.
!
To avoid risk of burns or other injuries, turn power off
and allow lamps to fully cool before attempting to
replace the halogen mini candelabra base bulbs.
6.4
Carefully slide the glass assembly over the light kit
assembly (Figure 22).
Position the light kit assembly's protruding screw heads
into the three keyhole slots of the glass assembly
(Figure 22).
Rotate the glass assembly clockwise to engage the
screw heads to secure the assembly (Figure 22).
NOTE: The three metal bands on the light kit
assembly will add extra security to the glass
assembly.
12/4/13 10:15 AM Page 14
6. Light Kit Assembly

WARNING

(continued)
LIGHT KIT
ASSEMBLY
SOCKET (2)
5-WATT (maximum) HALOGEN
MINI CANDELABRA BASE BULB (2)
Figure 21
POSITION THE GLASS ASSEMBLYKEYHOLE SLOTS STRAIGHT UP ONTO
THE LIGHT KIT ASSEMBLY PROTRUDING SCREWS.
ROTATE THE GLASS ASSEMBLY CLOCKWISE TO SECURE ONTO
PROTRUDING SCREWS AND METAL BANDS.
LIGHT KIT METAL
BANDS (3)
LIGHT KIT
ASSEMBLY METAL
BANDS (3)
Figure 22
14
LIGHT KIT
PROTRUDING
SCREW
HEADS (3)
GLASS
ASSEMBLY
KEYHOLE
SLOTS (3)
LIGHT KIT
ASSEMBLY
PROTRUDING
SCREW HEADS (3)
GLASS
ASSEMBLY
U.L. Model No.: CF4900