Installation Of Glass Shade; Warning - Emerson CF766BS00 Owner's Manual

1. Install two 60-watt (maximum) candelabra base light
bulbs (included) into the light fitter sockets
Figure 16).

WARNING

!
Over lamping the fan will result in the light bulbs being
automatically shut off. Use only 60-watt maximum
candelabra light bulbs. Turn off the electricity before
replacing the light bulbs.
2. Place the glass into the opening in the light kit
assembly, aligning the three flat areas on the top
edge of the glass with the three light kit tips on the
light kit assembly and turn the glass bowl clockwise
until it stops (Figure 17).
WARNING
!
To avoid possible fire hazard, do not exceed wattage
indicated on the light kit assembly.
NOTE: It is advisable to periodically check that the
glass is seated fully clockwise in the light kit
assembly.

6. Installation of Glass Shade

60-WATT (Max.)
CANDELABRA BASE
LIGHT BULB (2)
Figure 16
LIGHT KIT
ASSEMBLY
TIPS (3)
GLASS
Figure 17
10
LIGHT KIT
ASSEMBLY
SOCKET (2)
GLASS FLAT
AREA (3)
ETL Model No.: CF766