Emerson SOUTHTOWNE CF4900BS00 Owner's Manual page 22

BP7485 Southtowne CF4900
USING YOUR CEILING FAN
!
Fan installation must be completed, including the
installation of the fan blades, before testing the remote
control.
Your wall control has full control of your fan and light
(Figure 32).
NOTE: Prior to operation of the fan and light from
the wall control, set the fan speed to HIGH ( .... ) and
turn the light ON (
8.29
To set the desired fan speed, press the (
decrease the speed and the (
The LED display will light up to indicate the new speed
selected
8.30
To turn the downlight on, press and release the (
button. The light will turn on at the light intensity
previously selected. To change the intensity hold the
button down. The intensity will go up and down while
the button is held. Release the button at the desired
intensity.
8.31
To turn the uplight on, press and release the (
button. The light will turn on at the light intensity
previously selected. The intensity will go up and down
while the button is held. Release the button at the
desired intensity.
8.32
If airflow is desired in the opposite direction, press the
( ) button on the wall control. The fan must be
operating at any speed for the reverse button to
function. The blades will turn in the opposite direction
and reverse the airflow.
8.33
Your wall control comes complete with your choice of
three wall cover plates; ivory, white and light almond.
8.34
Your fan is now wired to be turned on and off from the
fan switch.
12/4/13 10:15 AM Page 22
8. Wall Control Procedures
WARNING
).
) button to
) to increase the speed.
(continued)
POWER
INDICATOR
LIGHT
AIRFLOW
DIRECTION
POWER
BUTTON
OFF
Figure 32
)
)
22
LIGHT
INTENSITY
BUTTONS
FAN SPEED
BUTTONS
ON
ON/OFF SWITCH
O = OFF / — = ON
U.L. Model No.: CF4900