Ceiling Fan Assembly; Warning - Emerson SOUTHTOWNE CF4900BS00 Owner's Manual

BP7485 Southtowne CF4900
3.1
Position the fan blade on top of the blade flange by
aligning the three raised bosses into the blade mounting
holes.
Install the three #10-32 x 1/4" Washer Head Blade
Screws into the mounting holes of the fan blade
assembly and tighten securely (Figure 1). I
Complete the installation of the remaining four blades
per the above instructions.
3.2
Slide the fan blade assembly through the blade slot in
the fan motor housing assembly (Figure 2).
Mount the fan blade assembly to fan motor housing
assembly using four #10-32 x 5/8" oval head blade
screws (Figure 2).
NOTE: Take care not to scratch fan motor housing
assembly when installing blade assemblies.
Complete the installation of the remaining four blade
assemblies per the above instructions.
!
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
3.3
Turn the partially assembled ceiling fan right side up for
final installation. Place the fan carefully onto the top of
the styrofoam as not to bend the ceiling fan blades
(Figure 3).
12/4/13 10:15 AM Page 5

3. Ceiling Fan Assembly

WARNING

Figure 1
#10-32 x 5/8" OVAL HEAD BLADE SCREW (4)
MOTOR HOUSING ASSEMBLY
FAN BLADE ASSEMBLY
Figure 2
CEILING FAN
(partially assembled)
Figure 3
Please contact 1-800-654-3545 for further assistance
5
#10-32 x 14" WASHER
HEAD BLADE SCREWS
(3 per blade assembly)
FAN BLADE (5)
FAN BLADE
FLANGE (5)
STYROFOAM
emersonfans.com
U.L. Model No.: CF4900