Warning - Emerson BATALIE BREEZE CF621SW00 Owner's Manual

Batalie breeze 52” wet location ceiling fan
Table of Contents

Advertisement

3. Ceiling Fan Assembly
3.9
Mount blade flanges to fan blades using four #10 - 24 x
12mm washer head screws and four 16mm flat
washers (supplied with fan) (Figure 7).
NOTE: Some accessory blades available are
supplied with shorter screws. These shorter screws
MUST be used to assemble the blades to flanges.
3.10
Loosely attach one blade/flange assembly to the motor
hub by securing the two 1/4 - 20 x 14mm captive pan
head screws. Make sure the screws are NOT tightened
(Figure 8). Repeat this procedure for other four blade
assemblies.
3.11
Once all five blade/flange assemblies are secured to
the motor hub, proceed to tighten all the 1/4 - 20 x
14mm captive pan head screws at this time.
3.12
Remove one #8 - 32 x 8mm pan head screw from the
lower housing adapter plate (reserve for later use).
Loosen the other two screws to assemble the lower
housing to the lower housing adapter plate (Figure 9).
3.13
Position the lower housing onto the fan motor assembly,
aligning each of the the three holes. Rotate the lower
housing to engage the two loosened screws in the two
key hole slots. Replace the #8 - 32 x 8mm pan head
screw (removed previously) and tighten all three screws
to secure the lower housing to the lower housing
adapter plate (Figure 9).
NOTE: Make sure wires are not pinched between
lower housing adapter plate and lower housing.
(continued)
Figure 7
1/4 - 20 x 14mm CAPTIVE
PAN HEAD SCREW (2)
Figure 8
!
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
LOWER HOUSING
LOWER HOUSING
ADAPTER PLATE
Figure 9
Please contact 1-800-654-3545 for further assistance
7
#10 - 24 x 12mm
WASHER HEAD SCREW
(4 per blade/flange)
16mm FLAT WASHER
(4 per blade/flange)
FAN BLADE
BLADE FLANGE
BLADE/FLANGE ASSEMBLY (5)

WARNING

LOOSEN TWO #8 - 32 x
8mm PAN HEAD SCREWS
REMOVE ONE #8 - 32 x
8mm PAN HEAD SCREW
emersonfans.com
U.L. Model No.: CF621

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Batalie breeze cf621vnb00Batalie breeze cf621vs00

Table of Contents