Table of Contents
Advertisement
Installing a Rope Clip - small desktop model
To help prevent hardware theft, you can add a 3/16 inch or 5 mm Rope Clip and
cable to your computer. After you add the security cable, make sure that it does
not interfere with other cables that are connected to the computer.
To install a Rope Clip:
1. Remove the cover (see "Removing the cover - small desktop model" on
2. Use a tool, such as a screwdriver, to remove the two metal knockouts.
3. Insert the Rope Clip through the rear panel; then attach and tighten the nuts
4. Replace the computer cover. For more information, see "Replacing the cover
5. Thread the cable through the Rope Clip and around an object that is not a part
Replacing the cover and connecting the cables - small desktop model
After working with options, you need to install any removed parts, replace the
cover, and reconnect cables, including power cords and telephone lines. Also,
depending on the option that is installed, you might need to confirm the updated
information in the Configuration/Setup Utility program.
To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that no tools
page 26).
with an appropriately sized or adjustable wrench.
and connecting the cables - small desktop model" on page 33.
of or permanently secured to the building structure or foundation, and from
which it cannot be removed; then fasten the cable ends together with a lock.
1 Rope Clip
2 Bolt holes
3 Nuts
What to do next:
To work with another option, go to the appropriate section.
or loose screws are left inside your computer.
Chapter 4. Installing Options
33
Hide quick links:
Advertisement
Table of Contents
