IBM 2254 Hardware Maintenance Manual page 113

POST Error Code
Tape Drive green "in use" LED fails to come
on
Tape automatically ejected from drive
SCSI ID on rotary switch does not match
SCSI ID set in configuration. Verify drive
switches inside cover are set to zero
Tape sticks or breaks in drive.
Verify that the tapes used meet ANSI
standard X3B5
212XX
213XX
214XX
215XXXC, 215XXXD, 215XXXE, 215XXXU
If an external device, and power-on LED is
off, check external voltages
216XX
217XX
If an external device, and power-on LED is
off, check external voltages
218XX
Check for multi CD tray or jukebox
219XX
24201Y0, 24210Y0
Be sure wrap plug is attached
273XX
27501, 27503, 27506, 27507
27502, 27504, 27510, 27511, 27533, 27534,
27536, 27537
27509
FRU/Action
1. Tape Drive
2. SCSI Adapter or System Board
3. SCSI Cable (internal)
4. SCSI Cable (external)
1. Tape Cassette
Drive
1. Rotary Switch Circuit Board
2. Circuit Board Cable
3. Tape Drive
1. Tape Cassette
1. SCSI Printer
2. Printer Cable
1. SCSI Processor
1. WORM Drive
1. CD-ROM Drive I
2. CD-ROM Drive II
Enhanced CD-ROM Drive II
Any CD-ROM Drive
3. SCSI Cable
4. SCSI Adapter or System Board
1. Scanner
1. Rewritable Optical Drive
2. SCSI Adapter or System Board
3. SCSI Cable
1. Changer
1. SCSI Communications Device
1. ISDN/2 Adapter
2. ISDN/2 Wrap Plug
3. ISDN/2 Communications Cable
1. 1 Mbps Micro Channel
Infrared LAN Adapter
2.
1. ServerGuard Adapter
2. System Board
3. Riser card
1. ServerGuard Adapter
1. Remove redundant adapters, run Auto
Configuration program, then retest.
Chapter 6. Symptom-to-FRU Index
105