3. Position the cover over the chassis and pivot the cover down over the
4. Reconnect the external cables and cords to the computer.
5. To update the configuration, see "Module test menu/hardware configuration
Removing the cover - microtower model
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
44
Hardware Maintenance Manual
computer until the cover snaps into place.
report" on page 13.
from the drives, and turn off all attached devices and the computer.
input/output (I/O) cables, and any other cables that are connected to the
computer.