Removing The Cover - Desktop Model - IBM 2254 Hardware Maintenance Manual

2. Clear any cables that might impede the replacement of the cover.
3. Place the cover over the computer and slide it to the rear until it is fully closed.
4. Reconnect the external cables and cords to the computer.
5. To update the configuration, see "Module test menu/hardware configuration

Removing the cover - desktop model

To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
4. Press the buttons on the sides of the computer and pivot the rear end of the
34
Hardware Maintenance Manual
Secure the cover with the screw.
report" on page 13.
from the drives, and turn off all attached devices and the computer.
input/output (I/O) cables, and any other cables that are connected to the
computer.
cover up toward the front of the computer.