Installing The Battery - TOHATSU MFS 6A3Z 8A3 9.8A3 Owner's Manual

26
INSTALLATION
4. Connect the positive cord (+) to the
positive terminal (+) of the battery, and
then connect the negative cord (—).
W h e n d i s c o n n e c t i n g t h e b a t t e r y
always remove the negative cord (—)
first. After connecting the positive ter-
minal (+), securely place a cap on it to
prevent short circuits.
1. Battery cord (red)
2. Battery cord (black)
ENOM00513-0

3. Installing the battery

1. Place the battery box in a convenient
position away from water spray.
Securely fasten both the box and the
battery so they do not shake loose.
ENON00509-0
Note
Minimum recommended battery: 12V, 70AH
or 12V, 40AH
Specifications and features of batteries vary
among the manufacturers. Consult the
manufacturer for details.
ENOW00013-0
WARNING
Battery generates explosive hydrogen gas.
Be sure to:
Charge the battery in a well-ventilated
place.
2
1
ENOF00512-0
Place the battery away from any source
of fire, sparks and open flames such as
burners or welding equipment.
Do not smoke when handling the bat-
tery.
Do not smoke near the battery when the
battery is charging.
ENOW00012-0
WARNING
Battery electrolyte contains sulfuric acid
and thus is hazardous, causing a burn if it
comes in contact with your skin, or poison-
ous if swallowed.
Keep battery and electrolyte away from
reach of children
When handling the battery, be sure to:
Read all warnings shown on the battery
case
Prevent electrolyte from coming in con-
tact with any part of your body. Contact
can cause serious burn or, if it comes in
contact with your eye, loss of sight. Use
safety glasses and rubber gloves.
In case battery electrolyte comes in con-
tact with:
Skin, flush thoroughly with water.
Eye, flush thoroughly with water, and
then seek immediate medical treatment.
In case battery electrolyte is swallowed:
Seek immediate medical treatment.