Stopping - TOHATSU MFS 6A3Z 8A3 9.8A3 Owner's Manual

ENOM00524-0
EP and EPT type
N
6
1. Forward (F)
2. Neutral (N)
3. Reverse (R)
4. Shift
5. Throttle
6. Fully open
7. Fully close
8. Neutral warm-up lever
9. Control lever
10. Lock button
ENOM00525-0
Forward
Quickly push the control lever to the For-
ward (F) position 32°, where the gear is
connected, while lifting up on the lock but-
ton located at the bottom of the control
lever grip. Further shifting will open the
throttle.
ENOM00526-0
Reverse
Quickly pull the control lever to the
Reverse (R) position at 32°, where the gear
is connected, while lifting up on the lock
9
10
2
8
ENOF00048-0
ENGINE OPERATION
button located at the bottom of the control
lever grip. Further shifting will open the
throttle.
ENON00015-0
Note
The control lever is inoperative unless the
free accel lever is in the fully closed position.
ENON00016-0
Note
Reduce the engine speed when the control
lever is in Neutral and do not increase the
engine speed unnecessarily.
ENOM00527-0

6. Stopping

ENOM00528-0
MF, EF and EFT type
1
1. Stop switch
2. Stop switch lock
1. Turn the throttle grip to the slow posi-
tion.
2. Put the shift lever in the Neutral posi-
tion.
Run the engine for 2-3 minutes at
idling speed if it has been running at full
speed.
3. Push the stop switch to stop the
engine or release the stop switch lock.
43
2
ENOF00569-0