1. Tilt lock knob in lock position
2. Tilt up position
ENOW00049-0
WARNING
Do not put hand or finger in between
outboard motor body and clamp bracket
when adjusting trim angle to prevent
injury in case the outboard motor body
falls.
When tilting up outboard motor with fuel
joint for over a few minutes, be sure to
disconnect fuel hose or close fuel cock,
or fuel may leak, potentially catching
fire.
Tilt down
1. Move the tilt lock knob to the unlock
position.
2. Raise the outboard to the tilt release
1
position.
3. Gently lower the outboard.
2
ENOF00547-0
1. Tilt lock knob in unlock position
2. Tilt release position
ENOW00050-0
Do not tilt up outboard motor during opera-
tion, or engine may be damaged from over-
heating due to lack of sufficient cooling
water.
ENGINE OPERATION
1
2
ENOF00548-0
CAUTION
51