TOHATSU MFS 6A3Z 8A3 9.8A3 Owner's Manual page 48

48
ENGINE OPERATION
UP
DN
The outboard motor can also be tilted
up using the switch provided under the
bottom cowl. (The Main Switch need
not be turned "ON" in this case.)
ENOM00535-0
EFT type
1. Operate the Power Tilt switch and tilt
the outboard motor up.
2. Lock the tilt with the Tilt stopper after
the outboard motor has been tilted up.
1
1. Tilt stopper
3. Manual tilting
If the battery is dead, and the Power
Tilt Switch inoperative, turn the manual
valve to counter-clockwise. This will
ENOF00067-0
allow manual tilting of the outboard
motor.
1. POWER
2. MANUAL
ENOW00044-0
ENOF00539-0
Excessive trim up or down may lead to
unstable boat operation, potentially caus-
ing the steering difficulty that leads to acci-
dent during cruising.
Do not cruise at high speed if improper
trim position is suspected. Stop the boat
and readjust trim angle before continu-
ing cruise.
For outboard motor model with PTT
switch on the bottom cowl, do not oper-
ate the switch during cruising, or control
ENOF00534-0
of boat may be lost.
ENON00018-0
Note
Stop the engine before adjusting trim angle.
ENOM00536-0
EFT/EPT type
The provided Power tilt makes tilt-up/
ENOF00540-0
1
2
ENOF00541-0
WARNING