2
1. Thrust rod
2. Higher
3. Lower
ENOM00533-0
EP type
1. Stop the engine.
2. Shift the outboard into forward.
3. Raise the engine to the tilt release posi-
tion (b).
4. Change the preset knob position.
5. Gently lower the outboard.
1
1. Preset knob
1
3
ENOF00536-0
ENOF00537-0
ENGINE OPERATION
A. Transom angle settings
B. Tilt release position
ENOW00046-0
WARNING
Do not put hand or finger in between
outboard motor body and clamp bracket
when adjusting trim angle to prevent
injury in case the outboard motor body
falls.
Unsuitable trim position can cause loss
of control of boat.
When testing a trim position, run boat
slow initially to see if it can be controlled
safely.
ENOM00534-0
EPT type
1. Operate the Power Tilt switch and tilt
the outboard motor up.(The Main
Switch must be "ON".)
47
A
B
ENOF00538-0