Color Temp Adj Menu; Overview - Sony Trinitron BVM-A14F5U Operation Manual

[A3] COPY FROM... menu (available in software
version 1.10 or higher)
Copy picture adjustment preset data.
PRESET VALUE...: Copy other data in the monitor.
k[A31]
OTHER MONITOR...: Copy data from another
monitor. k[A32]
MEMORY STICK...: Copy data from a file in the
"Memory Stick". k[A33]
Note
Matrix data is not copied.
[A31] PRESET VALUE... menu
Copy data from another channel or common data.
Select one from among PRESET1, PRESET2, PRESET3,
PRESET4 and PRESET5.
[A32] OTHER MONITOR... menu
Select another monitor. k[A321]
[A321] OTHER MONITOR menu
Copy data from another selected monitor.
Select one from among PRESET1, PRESET2, PRESET3,
PRESET4 and PRESET5.
[A33] MEMORY STICK... menu
Select a file in the "Memory Stick". k[A331]
[A331] MEMORY STICK menu
Copy data in the selected file.
Select one from among PRESET1, PRESET2, PRESET3,
PRESET4 and PRESET5.
30
[B] Adjusting the Color Temperature – COLOR TEMP ADJ Menu
[B] Adjusting the Color
Temperature – COLOR
TEMP ADJ Menu

Overview

The color temperature is adjusted.
Use the factory setting value or the adjusted value as a base
value to shorten the adjustment time.
Color temperature adjustment can be done in the following
three ways:
• Knob adjustment (MANUAL... menu)
You can adjust the bias and gain with the MANUAL
knobs.
• Automatic adjustment (AUTO... menu)
You can use the following probes for automatic adjustment
of color temperature. Except for the Sony BKM-14L, a
cable is required to connect the color analyzer to the
monitor.
Manufacturer
SONY
KONICA MINOLTA
DK-TECHNOLOGIES
THOMA
UDT INSTRUMENTS
For more information about the cable specification
required and about the connection, see "Connection Cable
Specifications for Color Temperature Probes" on page 59.
• Copying other data (COPY FROM... menu)
(available in software version 1.10 or higher)
Other data in this monitor, other monitors or "Memory
Stick" is copied.
Before adjusting the color temperature
We recommend that you perform automatic adjustment
using the AUTO... [A1] menu of the PICTURE ADJ menu.
Probe Model Name
BKM-14L (no cable required)
CA-100, CA-100plus
PM 5639
TF6
SLS 9400-FC