Sony Trinitron BVM-A14F5U Operation Manual page 91

Main menu
SYSTEM CONFIGURATION [D]
INSTALLATION SETTINGS [E]
FILE MANAGEMENT [F]
STATUS [G]
CONTROLLER [H]
KEY PROTECT [I]
Level 1
NETWORK [D1]
PARALLEL REMOTE [D2]
POWER [D3]
BLANKING SETTINGS [D4]
ON SCREEN SET [D5]
PASSWORD [D6]
MAINTENANCE [D7]
LANDING ADJUST [E1]
ALIGNMENT [E2]
DIGITAL UNIFORMITY ADJ [E3] Adjusts the color unevenness of the CRT. (page 45)
SAVE TO [F1]
COPY FROM [F2]
DELETE [F3]
DATA MAINTENANCE [F4]
CH STATUS [G1]
SLOT STATUS [G2]
MODEL NAME
SERIAL NO
SOFTWARE VERSION
OPERATION TIME
CRT TURN ON TIME
IP ADDR
CONTROLLER STATUS [G3]
MONITOR ID DISPLAY [H1]
NETWORK SETTING [H2]
NETWORK SW
Functions
Sets the system of the remote control function, LAN, etc. (page
39)
Sets the IP address, subnet mask and default gateway. (page 40)
Sets the remote control function. (page 41)
Sets the condition of the monitor when the main power or I/1
switch is turned on. (page 41)
Adjusts the data for the picture. (page 41)
Sets the data for the screen display. (page 42)
Sets the passwords for the menu. (page 42)
Displays the menu for maintenance. (page 42)
Sets the initial value of landing, alignment, etc. (page 43)
Corrects the shift of beam landing caused by the earth's
magnetism. (page 44)
Adjusts the position and size of the picture. (page 44)
Saves, copies and deletes the system data. (page 47)
Writes the data. (page 48) (available in software version 1.10 or
higher)
Reads or copies the data. (page 48) (available in software version
1.10 or higher)
Deletes the file. (page 48) (available in software version 1.10 or
higher)
Services the system data. (page 48)
Displays the information about the monitor or options installed in
the monitor. (page 49)
Displays the information of the used channel. (page 50)
Displays the data about the optional board installed in the option
slot 1 to 3. (page 50)
Displays the model name. (page 50)
Displays the serial number. (page 50)
Displays the software version. (page 50)
Displays the operation time. (page 50)
Displays how long the CRT is used. (page 50)
Displays the IP address of the monitor. (page 50)
Displays the information on the controller (controlled moitor).
(page 50)
When the Monitor Control Unit BKM-15R is connected, sets the
network of the controller. (page 51)
Sets the display method of the monitor select display window.
(page 51)
Displays the NETWORK SETTING menu. (page 51)
Sets the Ethernet connections. (page 51)
Sets whether or not to lock the buttons on the monitor. (page 52)
27
Menu Structure