Keypad Tones - Bosch Solution 64 User Manual

Icon Status
The area is turned off.
On
The area is turned All On or Part On
Off
The area is turned All On
On
The area is turned Off
Off
On You have mail waiting to be read
No Mail
Off
Area is ready to turn on (All On / Part
On
On) )
Not ready, Zone Open
Off
All On
On
Red
LED
Alarm
Flashing
On Area is off.
Green
LED
Area not ready to turn on
Flashing
Red &
Installer programming mode is active.
Flashing
Green
LED
Table 3: Status ICONs, LED Indicator's and Their Meanings

Keypad Tones

Your keypad emits several distinct tones and displays text to
alert you to system events. Additional bells or sirens may also
be connected to your system. Bells or sirens mounted on the
exterior of your premises alert neighbours to emergencies and
provide an audible guide for police and fire fighters.
Type
When a fire zone sounds an alarm, the keypad
Fire
will sound 3 seconds on and 2 seconds off
Alarm
Tone (repeat).
When a burglary zone activates while your
Burglary
system is turned on, your keypad emits a
Alarm
continuous siren tone. It sounds for the time set
Tone
by your security company.
When a system component is not functioning
Trouble
properly, your keypad sounds 4 fast short beeps
Tone
followed by a 5 second pause (repeat).
Pressing any key on the keypad sounds one
Key
short beep, indicating that the key press is
Press
Tone
accepted.
When you enter the premises through a zone
programmed for entry delay, the keypad sound a
Entry
Hi/Low tone to remind you to turn off the area.
Delay
If the area is not turned off before the entry
Tone
delay expires, an alarm condition will sound and
a report may be sent to your alarm company.
Bosch Security Systems | 12/05 | BLCC110U
Meaning
Meaning
After you turn an area All On, the keypad will
sound 1 short beep every second. During the
Exit
last 10 seconds fast short beeps will be heard. If
Delay
Tone you don't exit before the delay time expires and
an exit delay door is faulted, an alarm occurs.
If you press an incorrect key, your keypad will
Error
sound a 2 second tone.
Tone
The keypad will sound a Hi / Lo tone to indicate
Menu
you have entered MENU Mode and a Lo/Hi
Mode
tone to indicate you have exited MENU mode.
The keypad sounds fast short beeps to alert you
Chime
when a zone programmed for chime is faulted
Tone
or unsealled.
Table 4: Keypad Tones and Their Meanings
Figure 1: CM100 Graphic Keypad
Solution 64 | User Guide
7