Timer Group; Access Assignment; Areas; Area Status - Bosch Solution 64 User Manual

Access > User Properties >

Timer Group

This menu is used to assign a User to a Timer Group. Timer
Groups can be used to restrict User access to be within specific
times defined by schedules. Each User can only be assigned to
one Timer Group. Setting this option to 0 will give the User 24
hour access to the system.
1. Enter [MENU] + [1] + [4] + [4] and select the user from the
list then press [OK].
Ur001 John Smith
Ur002 Debbie Smith
Ur003 User 3 Name
Press
2. Using the numeric keys, enter the Timer Group. Valid
entries are 1 – 8 or 0 to disable.
Timer Group Ur001
00
Press 0 0 0 - - 9 OK to SAVE 9 OK to SAVE
3. Press [OK] to save and exit or press [MENU] to exit without
saving.
Access > User Properties >

Access Assignment

This menu allows you to assign each user to one or more access
groups. An access group is used to allow and/or restrict which
users have access to various system outputs. These outputs can
be used to control door strikes, gates or roller doors etc.
1. Enter [MENU] + [1] + [4] + [5] and select the user from the
list then press [OK].
Ur001 John Smith
Ur002 Debbie Smith
Ur003 User 3 Name
Press
2. Use the up and down arrow keys to highlight the Access
Group then press the [ON] key to select or the [OFF] key to
deselect.
Access Group 1
Access Group 2
Access Group 3
Press
3. Repeat Step 2 until all required Access Groups are
programmed, then press [OK] to save and exit or press
[MENU] to exit without saving.
Bosch Security Systems | 12/05 | BLCC110U
MENU 1-4-4
OK or MENU
MENU 1-4-5
OK or MENU
OK ON OFF MENU

Areas

The Solution 64 control panel has the ability to be partitioned up
to 8 individual areas. This section outlines various commands that
control individual areas.
Areas > Commands >

Area Status

This menu allows users the ability view the area status of the
current area or the status of a different area. This menu is only
available via a keypad who's corresponding area is turned off.
1. Enter [MENU] + [2] + [0] + [0].
A list of available areas will display on the keypad.
A001 Main Office
A002 Production
A003 Warehouse
PRESS , OK or MENU
2. Use the [ ] and [ ] keys to select the area that you want
to view the status information, then press [OK] to select.
Alternatively, you can enter the area number, then press
[OK].
The keypad will display the area status information.
Main Office A001
Disarmed
Press OK or MENU
If the area is turned All On, the keypad will display:
Main Office A001
Armed All On
If the area is turned Part On, the keypad will display:
Main Office A001
Armed Part On
3. To exit, press [OK].
Solution 64 | User Guide
MENU 2-0-0
13