Bosch Solution 64 User Manual page 2

Solution 64 | User Guide
Copyrig h t N o t i ce
Unless otherwise indicated, this publication is the copyright
of Bosch Security Systems Pty Ltd ("Bosch"). All rights are
reserved.
You may download a single copy of this publication. By
downloading the publication you agree that you will: (i) only use
the publication for your own reference; (ii) not commercially
exploit or charge any person for the use of the publication; and
(iii) not modify the publication in any way without the prior
written permission of Bosch.
Except as specified above or where authorised by the Copyright
Act 1968 (Cth), no part of this publication may be reproduced,
transmitted, modified or stored in any form or by any means,
without the prior written permission of Bosch.
N o t i c e o f L i a b i l i t y
While every precaution has been taken in the preparation of this
document, neither Bosch Security Systems Pty Ltd nor any of
its official representatives shall have any liability to any person
or entity with respect to any liability, loss or damage caused or
alleged to be caused directly or indirectly by the information
contained in this book.
Bosch Security Systems Pty Ltd reserves the right to make
changes to features and specifications at any time without prior
notification in the interest of ongoing product development and
improvement..
Thank you for selecting the Solution Security Control Panel for your security needs. Your system includes many advanced features and
functions which will be programmed and configured by your security consultant during installation. Depending on the configuration,
and your access level, you may have the ability to program certain features within the system to suit changes in your security needs. For
example you may wish to change a User Name or PIN number when a staff member leaves.
This manual explains all aspects of system operation as well as detailling the various programming options available to you. We ask that
you take the time to read this manual carefully and that you have your installer explain the basic system operation and configuration to
you when the installation is complete.
2
Tele pe rm it No te
The grant of a Telepermit for a device in no way indicates
Telecom acceptance of responsibility for the correct operation
of that device under all operating conditions.
This equipment shall not be used in any manner that could
constitute a nuisance to other Telecom customers.
Immediately disconnect this equipment should it become
physically damaged, and arrange for its disposal or repair.
The transmit level from this device is set as a fixed level
and because of this there may be circumstances where the
performance is less than optimal. Before reporting such
occurrences as faults, please check the line with a standard
telepermitted telephone.
N o t ic e t o O wn e r
Bosch Security Systems | 12/05 | BLCC110U