Tadiran Telecom T207S User Manual page 175

Programmable Buttons
Coral feature/internal destination in a programmable button:
The phone's configuration option offers programming any one of the following button types per button:
Speed Dial, Do Not Disturb, Phone Lock, Auto Answer, Call Forward, Call Blocking.
To program a Coral feature or port destination into one of the phone's programmable buttons, choose the Speed Dial
Button type. Continue to enter the entire feature code programming sequence, as described in this guide, including the
activation or cancellation code .
To program Coral feature codes or speed dial destinations in programmable buttons (1-4):
[Config]
1. Press .
2. Use the up/down navigator keys to select 14.Program button press OK.
3. Use the up/down navigator keys to select the button to be programmed and press OK (see figure on
button numbers):
- Button1 corresponds to programmable key labeled 1.
- Button2 corresponds to programmable key labeled 2.
- Button3 corresponds to programmable key labeled 3.
- Button4 corresponds to programmable key labeled 4.
4. Use the up/down navigator keys to select 1.Button type and press OK.
5. Select Speed Dial and press OK.
6. Use the up/down navigator keys to select 2.Button speeddial and press OK.
7. Enter numbers from the dial pad. Use
8. Press OK to end.
9. Press the left arrow key a few times to reach the "Quit Confirm:" screen.
Programmable Buttons
[Backsp]
to delete.
163 T207S, T208S, T207S/NP and T208S/BL User Guide
page 161 for