HP MSM710 Installation Manual page 14

Perform the verification
This test uses your existing wired connection to the controller LAN port to test the public access
interface that is used for guest access. The controller Internet port must be connected to the Internet
for this test to be successful.
1. Open your Web browser and enter the address of an Internet site, for example www.hp.com.
The controller intercepts the URL and displays the public access interface Login page.
2. Enter the Username and Password for the test account you created earlier and then select
Proceed.
Both the interface session page (shown on left) and the public access welcome page (shown
on right) open.
3. Select Continue browsing to launch desired web page.
For additional configuration and operating information, see the MSM7xx Controllers
Configuration Guide.
14 Controller initial configuration