Powering The Controller - HP MSM710 Installation Manual

This product does not have a power switch. It is powered-on when the LAN port is connected
to the external power supply is plugged into a PoE power source.
This product and all interconnected equipment must be installed indoors within the same
building (except for outdoor models), including all PoE-powered network connections as
described by Environment A of the IEEE 802.3af standard.

Powering the controller

The controller can be powered by:
The provided 48-volt power supply.
A 10/100 or 10/100/1000 PoE-enabled switch. Various PoE-enabled switches are available
from HP.
An HP PoE 1-Port Power Injector (J9407A).
CAUTION:
gigabit-compatible power injector. Although 10/100 PoE-enabled switches are compatible, PoE
injectors designed for 10/100 networks only are NOT compatible with the AP.
6 Preparing for installation
If the controller will be powered by a user-supplied PoE power injector, use only a