Cleaning Your Scooter - KYMCO Xciting 250i Owner's Manual

MAINTENANCE
Failure to follow this manual's instructions about tube-
less tires may result in an accident due to tire failure.
Tubeless tires require different service procedures than
tube-type tires.
Tubeless tires require a tight seal between the tire
bead and wheel rim. Special tire irons and rim pro-
tectors, or a specialized tire mounting machine,
must be used for removing and installing tires to
prevent tire or rim damage which could result in
an air leak.
Repair puncture in tubeless tires by removing the
tire and applying an internal patch. Repairs of this
type should only be done by a qualified tire ser-
vice professional.
Never use an external repair plug to repair a punc-
ture since the plug may work loose as a result of
the cornering forces experienced in a scooter tire.
After repairing a tire, do not exceed 50 MPH (80
km/h) for the first 24 hours, and then never exceed
80 MPH (130 km/h) thereafter. This is to avoid ex-
cessive heat build-up which could cause the re-
pair to fail; resulting in tire deflation.
Replace the tire if it is punctured in the sidewall
area, or if a puncture in the tread area is larger than
3/16 in (6 mm). Punctures of this size cannot be
repaired adequately.
Cleaning
Clean your scooter regularly to protect the surface finishes
and inspect for damage, wear , and oil, coolant or brake fluid
leakage.
Avoid cleaning products that are not specifically designed for
scooter, motorcycle, or automobile surfaces. Non-specific
cleaners may contain harsh detergents or chemical solvents
that could damage the metal, paint, and plastic on your scooter .
NOTE: If your scooter is still warm from recent operation,
give the engine and exhaust system time to cool off be-
fore washing. Avoid the use of high pressure water spray
(typical in coin-operated car washes) as the powerful spray
can damage components on your scooter.
73