KYMCO Xciting 250i Owner's Manual page 56

MAINTENANCE
4 4 4 4 4
3. Remove the oil drain plug 4 from the crankcase to drain
the oil.
54
4. Reinstall the drain plug and tighten it to the specified torque.
Oil drain plug torque: 18 lb-ft (25 N-m)
5. Add oil to the engine per the amounts listed below , and
reinstall the oil filler/dipstick.
Engine oil capacity - Xciting 500i or 500Ri: 2.1 qt (2.0 L)
Engine oil capacity - Xciting 300i or 300Ri: 0.95 qt (0.9 L)
Engine oil capacity - Xciting 250i or 250Ri: 0.95 qt (0.9 L)
NOTE: Amounts are after draining the oil only.
6. Start the engine and let it idle for 2 - 3 minutes.
7. Stop the engine and check the oil level on the dipstick
when the scooter is parked on the center stand, on level
ground.
8. Adjust the oil level as required (so the level reaches the
upper mark on the dipstick). Replace the dipstick and in-
spect for any leaks.
Running the engine with insufficient oil pressure can
cause serious engine damage.
The engine and related components can become very hot.
Use care when inspecting the oil level so you do not burn
yourself. If needed, let the engine and exhaust system cool
before working in those areas.