Brakes - KYMCO Xciting 250i Owner's Manual

CONTROLS & FEATURES
Left handlebar switch
8 8 8 8 8
7 7 7 7 7
Dimmer switch 7 7 7 7 7 :
" " switch position turns the headlight low beam on.
" "switch position turns the headlight high beam on and the
high beam indicator light on the dash is activated as well.
Passing light button 8 8 8 8 8 :
Use this button to rapidly flick the headlamp high beam on and
off to signal other vehicles that you wish to pass.
22
(continued)

Brakes

Combination brake lever (left handlebar)
Apply the front and rear brakes squeezing the left hand brake
lever gently towards the grip. The brake light will illuminate
when the lever is squeezed.
Front brake lever (right handlebar)
Apply the front brake only by squeezing the right hand brake
lever gently towards the grip. The brake light will illuminate
when the lever is squeezed.