KYMCO Xciting 250i Owner's Manual page 58

MAINTENANCE
500i & 500Ri models
9 9 9 9 9
6. Xciting 500i & 500RI models: Remove the rubber sleeve
8 by removing the clip AT.
500i & 500Ri models
AK AK AK AK AK
7. Xciting 500i & 500RI models: Remove the oil filter cartridge
AK with a filter wrench, and allow any residual oil to drain out.
Discard the oil filter cartridge.
56
AT AT AT AT AT
AL AL AL AL AL
8. Xciting 500i & 500RI models: Apply a thin coat of fresh en-
gine oil to the new oil filter cartridge' s rubber seal AL.
9. Xciting 500i & 500RI models: Using the KYMCO special
tool and a torque wrench, install the new oil filter cartridge and
tighten it to the specified torque.
Oil filter cartridge torque:
Only use a genuine KYMCO genuine oil filter cartridge,
or a filter cartridge of equivalent quality, on your scooter.
Using the wrong KYMCO filter cartridge, or a non-
KYMCO filter cartridge which is not of equivalent qual-
ity, may cause engine damage.
8 lb-ft (12 N-m)