Helmet Holder; Center Stand - KYMCO Xciting 250i Owner's Manual

CONTROLS & FEATURES

Helmet holder

To use the helmet holders, open the seat (see page 27), and
hook your helmet's fastener ring to the holder 1 and close the
seat securely.
1 1 1 1 1
Riding your scooter with a helmet attached to the holder
can interfere with the rear wheel or suspension and can
cause a crash in which you can be seriously hurt or killed.
Use the helmet holder only when your scooter is parked.
Do not ride with a helmet hanging from the holder.

Center stand

Your Xciting scooter is equipped with a center stand 2 and a
side stand.
1 1 1 1 1
To park your scooter on the center stand, place your foot on
the stand extension and then rock the scooter to the rear, pull-
ing upward on the passenger hand rail grasped by your right
hand, while steadying the handlebars with your left hand.
2 2 2 2 2
31