Section 3 - Operation; Pre-Ride Inspection - KYMCO Xciting 250i Owner's Manual

SECTION 3 -
OPERATION

Pre-ride inspection

For your safety , it is very important to take a few moments
before each ride to walk around your scooter and check its
condition. If you detect any problem, be sure to address it im-
mediately, or have it corrected by your KYMCO dealer .
Improperly maintaining your scooter or failing to cor-
rect a problem before riding can cause a crash in which
you can be seriously hurt or killed.
Always perform a pre-ride inspection before every ride
and correct any problems.
1. Engine oil level: Add engine oil if required (page 52). Check
for leaks.
2. Fuel level: Fill fuel tank when necessary (page 24). Check
for leaks.
3. Coolant level: Add coolant if required. Check for fluid leaks
(page 62).
4. Front and rear brakes: Check operation, make sure there
is no brake fluid leakage (page 65).
34
5. Tires: Check condition and inflation pressure (page 71).
6. Throttle: Check for smooth operation and that it closes com-
pletely in all steering positions (page 60).
7. Lights and horn: Check that headlight, tail/brake light, turn
signals, indicators and horn function properly .
8. Engine stop switch: Check for proper function (page 20).
9. Side stand ignition cut-of f system: Check for proper func-
tion (page 64).
10.Steering: Check for condition and smoothness.