Battery Removal & Service; Battery Installation - KYMCO Xciting 250i Owner's Manual

MAINTENANCE
Battery removal
The battery is in the battery box below seat.
NOTE: Always keep ignition switch OFF when servicing
the battery.
1 1 1 1 1
1. Open the seat (see page 27).
2. Remove the cover screws 1 and battery cover 2.
68
3. Remove the battery retainer 3.
4. Disconnect the negative (-) terminal lead 4 from the
2 2 2 2 2
battery first, then disconnect the positive (+) terminal
lead 5.
5. Pull out the battery from the battery box.

Battery installation:

Install in the reverse order of the battery removal: Connect the
positive lead (+) first, then the negative lead (-).
5 5 5 5 5
3 3 3 3 3
4 4 4 4 4