Keys; Section 2 - Controls & Features; Security Shutter - KYMCO Xciting 250i Owner's Manual

CONTROLS & FEATURES

KEYS

Your Xciting scooter is supplied with four keys: two identical
ignition switch keys 1 and two identical shutter keys 2. The
ignition keys operate the ignition switch, the steering lock, the
fuel filler cap, and are used to open the seat to gain access to
the center compartment. The shutter keys are used to open
the security shutter that covers the ignition switch.
KYMCO scooter is equipped with this security shutter to mini-
mize vandalism and theft.
1 1 1 1 1
Both pairs of keys have a unique code that is stamped on the
tabs supplied with the keys. This code is not stamped on the
scooter and is not recorded in the vehicle's basic documenta-
tion for security reasons. Since the codes are required if you
need replacement keys, record these important codes in the
boxes provided on the inside, rear cover of this Owner's
Manual.
16
Your
2

SECURITY SHUTTER

To open the ignition switch security shutter:
Turn the shutter key until the "OPEN" side is facing upward and
insert the shutter key into it's slot on the ignition switch cover .
To shut the ignition keyhole security shutter:
Turn the shutter key until the "SHUT" side is facing upward and
insert the shutter key into it's slot on the ignition switch cover .
NOTE: Apply a lock lubricant with antifreeze properties to
the security shutter if the outside air temperature drops
below freezing (32 F, 0
o o
C).