Advertisement
Table of Contents
- 1 Tools Needed
- 2 Step 1: Open the Seat Compartment Using the Key.
- 3 Step 5: Tighten the Clamp at the Fuel Pump.
- 4 Step 6: Tighten the Clamp at the Fuel Injector.
- 5 Step 7: Check the Length of the Exposed Tail of the Clamp.
- 6 Step 8: Testing the Fuel Line Repairs.
- 7 Step 9: Re-Assemble the Unit.
- Download this manual
KICK-START YOUR MOST CONSUMING OBSESSION
LIKE 200I FUEL LINE FITTING INSPECTION/ REPAIR PROCEDURE
Recall Code # Like200-2019-Recall-Adj
Step: 1
Tools needed: Phillips head screw driver, 10mm
socket w/ ratchet, a torque wrench with a usable
range of 0-30 lbf.in w/ 7mm socket, and a 6"
scale.
Step: 2
Open the seat compartment using the key.
Step: 3
Move contents to locate the 4 bolts and 2 screws
securing the seat/storage box and remove them.
Remove the seat/storage box as one unit and
place it to the side.
Step: 4
Locate the fuel line connection at the fuel pump
and fuel injector as indicated.
NHTSA #19V036
Advertisement
Table of Contents
Related Manuals for KYMCO LIKE 200I 2019
Summary of Contents for KYMCO LIKE 200I 2019
- Page 1 Recall Code # Like200-2019-Recall-Adj NHTSA #19V036 KICK-START YOUR MOST CONSUMING OBSESSION LIKE 200I FUEL LINE FITTING INSPECTION/ REPAIR PROCEDURE Step: 1 Tools needed: Phillips head screw driver, 10mm socket w/ ratchet, a torque wrench with a usable range of 0-30 lbf.in w/ 7mm socket, and a 6” scale.
- Page 2 Recall Code # Like200-2019-Recall-Kit NHTSA #19V036 KICK-START YOUR MOST CONSUMING OBSESSION LIKE 200I FUEL LINE FITTING INSPECTION/ REPAIR PROCEDURE Step: 5 Tighten the clamp at the fuel pump: Loosen the clamp and check the position of the fuel line. Tighten the clamp to 18-23 lbf-in. with a 0-30 lbf-in torque wrench and 7mm socket.
Need help?
Do you have a question about the LIKE 200I 2019 and is the answer not in the manual?
Questions and answers