System Setup; Protection Areas; Outputs - DMP Electronics Security Command XR20 User Manual

System Setup

We have provided this System Setup section to allow you to track the
current status of the programmable options on your Security
Command system. If you make changes to the system, you should
update the information contained on these pages.
My system is monitored by a central station.
❏ Yes ❏ No
C/S Name: ______________________________________________
Address: ________________________________________________
City/State: ______________________________________________
Emergency Phone: ________________________________________
Service Phone: ___________________________________________
Service Manager: _________________________________________
My system sends Opening and Closing reports.
❏ Yes ❏ No
My system sends Zone Bypass reports.
❏ Yes ❏ No
My system sends Ambush reports.
❏ Yes ❏ No
XR20
System Setup
System Setup

Protection Areas

Number
1 _____________________________________________
2 _____________________________________________
3 _____________________________________________
4 _____________________________________________

Outputs

Your system has 4 outputs that can be used for various functions.
Below is a list of these outputs and the devices they control.
Output #
1 _______________________________________________
2 _______________________________________________
3 _______________________________________________
4 _______________________________________________
Enter the Output number above when using the Outputs On Off User
Menu option to manually toggle the outputs.
Description
What it controls
27