Account Number - DMP Electronics Security Command XR20 User Manual

Numeric Pager Display
00128-301 2340010
Account Message
Number I D

Account Number

This number has been programmed into your Security Command
system as an identifier. Whenever the system sends a message to
your pager, it will send the account number first to identify itself.
Message ID
A single digit, 1 to 7, is sent describing the message.
1 = Zone Alarm
2 = Zone Trouble
3 = Area(s) Arming
4 = Area(s) Disarming
Zone or Area Number
If this message is for a zone, the 1- to 2-digit zone number is
displayed. If this message is for areas that are being armed or
disarmed, the area numbers are shown in sequential order. For
example, 1 2 4.
User Number
This is a 3-digit number that identifies the user.
Security Command Numeric Paging
34
Always Area Always User
Zero Number Zero Number
5 = Late To Close
6 = User Check-in
7 = Local Message
Alphanumeric Pager Display
Account Number
Whenever the system sends a message to your pager, it will send
the account number first to identify itself. You will see:
Typical Zone Event Display Description
20002 001 NORTHWEST DOORS
Account Zone Zone Name
Zone Types - BURG, FIRE, SUPV (Supervisory), PANC (Panic), EMRG (Emergency), AUX1,
or AUX2
Events - ALARM or TROUBLE
Typical Arming/Disarming Display Description
20002 ARMED 0016 01 EAST WAREHOUSE
Account Event User # Area #
Events - ARMED or DISARMED
User Checkin Display Description
20002 USER CHECKIN REPORT BY 0016
Account Function Performed
Functions - USER CHECKIN REPORT (An authorized user has selected Check-in from the
User Menu)
Typical System Event Display Description
20002 LATE TO CLOSE
Account Event
Events - LATE TO CLOSE (The system was armed by the scheduled closing time)
ALARM CANCELLED (An alarm has been cancelled by an authorized user)
Security Command Alphanumeric Paging
BURG *ALARM* SHIPPING
Zone Type Event Area Name
Area Name
User #
XR20
Appendix