System Setup; Security Command Keypads; Outputs - DMP Electronics SecurityCommand XR10 User Manual

System Setup

We've provided this System Setup section to allow you to track the
current and future status of the programmable options on your
Security Command system. If you make changes to the system, you
should update the information contained on these pages.
Your system is monitored by a central station.
Yes No
C/S Name: _____________________________________
Address: _____________________________________
City/State: _____________________________________
Emergency Phone: _____________________________________
Service Phone: _____________________________________
Service Manager: _____________________________________
Your system sends Opening and Closing reports.
Yes No
Your system sends Zone Bypass reports.
Yes No
Your system sends Ambush reports.
Yes No
20

Security Command keypads

Address Locations
1 _____________________________________________
2 _____________________________________________
3 _____________________________________________
4 _____________________________________________

Outputs

Your system has 4 outputs that are used to control various functions
within the building or around its perimeter. Below is a list of these
outputs and the devices they control.
Output # What it controls
1 _____________________________________________
2 _____________________________________________
3 _____________________________________________
4 _____________________________________________
Enter the Output number above when using the Outputs On Off User
Menu option to manually toggle the outputs.
System Setup