Security Command User Menu - DMP Electronics Security Command XR20 User Manual

Security Command User Menu

Many of the features of your system have been put into a User Menu
you can access from any Security Command keypad. The menu
requires you to enter your user code and then only shows those
functions to which you have access.
To access the User Menu:
1. Press the COMMAND key until MENU? NO YES displays.
2. Select YES. The keypad displays ENTER CODE: . Enter your
user code. You can now scroll down through the list of system
features available to your authority level.
User Menu Options
The list below shows the User Menu options:
Menu Option Description
USER CHECKIN
ACTIVITY CHECK
SENSOR RESET
OUTPUTS ON/OFF
XR20
User Menu
Allows monitoring of children coming
home from school.
Monitor a zone for non-activity.
Resets smoke or glassbreak detectors
that have latched due to an alarm
condition.
Allows you to turn on or off any of the
outputs described in the System Setup
section of this guide.
User Menu
BYPASS ZONES
ZONE MONITOR
SYSTEM TEST
USER CODES
SCHEDULES
TIME
DISPLAY EVENTS
SERVICE REQUEST
The following pages detail each User Menu item and provide
instructions on when and how to use them properly.
Allows you to Bypass a zone or reset an
already bypassed zone.
Allows you to add or remove a zone
from the monitor mode.
Tests the system's siren, communication
to the central station, and backup
battery.
Allows you to add, delete, or change
user codes and authority levels.
Allows you to add, remove, or change
system schedules.
Allows you change the Day, Date, or
Time that is currently in the system.
Allows you to view or print the last 140
events that occurred on your system.
Allows you to send a message to the
Central Station requesting service on
the alarm system.
13