DMP Electronics XR500 User Manual
Hide thumbs
Also See for XR500:
- Programming manual (85 pages) ,
- User manual (80 pages) ,
- Programming options (11 pages)
Advertisement
Table of Contents
Disarming the Alarm System
1. Press CMD until ARM
2. Select DISARM, enter your user code and press CMD.
3. At ALL?
NO YES, if you select NO, the keypad
displays the name of each area followed by NO
YES. Select YES or NO to disarm area(s) of your
choice.
Arming the Alarm System
1. Press CMD until ARM
2. Select ARM, enter your user code if a closing code is
required and press CMD.
3. At ALL?
NO YES, if you select NO, the keypad
displays the name of each area followed by NO
YES. Select YES or NO to arm the area(s) of your
choice.
4. SYSTEM ON or ALL SYSTEM ON displays.
Note: SYSTEM ON means at least one area in the
system is armed.
ALL SYSTEM ON means all areas in the system
are armed. The keypad begins counting down
the exit time.
XR500 Arming and Disarming Quick Reference
DISARM displays.
DISARM displays.
www.BevanSecurity.com
USER'S GUIDE
��������������������
���������
���������
����������������������
Keypad Layout and Function Keys
� � � � �
� � �
� ��� ��
�����������
��
��
��
�
��
��
��
�
�����������
��
��
�
���
��������������
Advertisement
Table of Contents
Related Manuals for DMP Electronics XR500
Summary of Contents for DMP Electronics XR500
- Page 1 USER’S GUIDE XR500 Arming and Disarming Quick Reference Disarming the Alarm System 1. Press CMD until ARM DISARM displays. �������������������� 2. Select DISARM, enter your user code and press CMD. 3. At ALL? NO YES, if you select NO, the keypad ���������...
- Page 2 Disarming Steps Arming Steps Press CMD. 6:29 AM Press CMD. 6:29 AM Press the key under DISARM. Press the key under ARM. DISARM DISARM Enter user code, and press CMD. ENTER CODE: - Enter your user code, and press CMD. ENTER CODE: - Select NO to Disarm only certain areas.
Need help?
Do you have a question about the XR500 and is the answer not in the manual?
Questions and answers