Chapter 5 Faq & Troubleshooting - Quanmax QutePC-2000 User Manual

Chapter 5
Chapter 5
FAQ & Troubleshooting
Frequently asked questions
Q1: How to change Boot device from HDD to other bootable devices?
A1: When seeing POST message, press "F11" to load BBS table then to select the
bootable device you plug in.
Q2: How to use the e-SATA device in QutePC-2000?
A2: The e-SATA connector for QutePC-2000 is not support hot-plug device, you
have to plug in before you boot the system. Please note if you're using 3.5" HDD,
please provide extra power input for the HDD.
Q3: How to set the WOL (Wake on LAN) function?
A3: WOL function is the default support in QutePC-2000 so you don't do any
modification setting in QutePC-2000 BIOS.
Q4: How much current provided from QutePC-2000 USB ports?
A4: 500mA
QutePC‐2000 User's Manual
33