Assembly - ProBoat PRB4075 Owner's Manual

Required Equipment and Accessories
Transmitter
AA battery (4)
Motor battery (2) (charged)
Hook and loop tape
1. Locate the pieces for the boat stand.

The longer side pieces will key to the
shorter end pieces. Use a small amount of
Medium CA to glue the pieces together.
Note: Steps 2 through 4 relate only to
the RTR version of the Mystic. Please
refer to the instructions provided with
your particular radio system if assembling
the PNP version of this model.
2. Slide the cover from the bottom of the

transmitter to access the battery holder.

Assembly

3. Install the four AA batteries in the

battery holder. Match the polarity of the
batteries to the molded markings in the
battery holder.
4. Slide the battery cover back on the

bottom of the transmitter.
4