Setting Up Mobile Devices - KGuard Security TC801 User Manual

Chapter 4: Using the DVR
5
Enable or disable Cruise mode.
6
After all settings are complete, click Apply.
7
When data saving is complete, click OK.
Note:
The PTZ camera can only be activated when a connected channel with the PTZ camera is selected.

4.4.4 Setting Up Mobile Devices

To remotely access the DVR via mobile devices, be sure that the DVR network connection is properly configured before
proceeding with the mobile devices setup.
To configure the mobile devices, do the following:
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > DEVICE > MOBILE.
3
Set the User Name and User Password which you have set for the DVR (see
for details on using the virtual keyboard).
4
Enter the Server Port. The setting range is between 1024 and 65535.
Note:
The user name and password cannot be left empty.
5
After all settings are complete, click Apply.
DVR User's Manual
44
"3.3.2 Virtual Keyboard" on page 21