Setting The Network; Dhcp; Pppoe - KGuard Security TC801 User Manual

Chapter 4: Using the DVR

4.2 Setting the Network

To enable remote monitoring, recording, playing, or configuring the setting, you need to configure the network settings
first. There are four types of network setup: DHCP, PPPoE, Static IP, and DDNS. Consult your Internet Service Provider
(ISP) to determine the type of network connection you are using and the required parameters to complete the setup.

4.2.1 DHCP

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > NETWORK.
3
On Type, select DHCP.
4
Specify the Media Port and WEB Port numbers.
5
After all settings are complete, click Apply.
6
When data saving is complete, click OK.

4.2.2 PPPoE

The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating Point-to-Point Protocol (PPP)
frames inside Ethernet frames.
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > NETWORK.
3
On Type, select PPPoE.
4
Specify the Media Port and WEB Port numbers.
5
Enter the username (an email address) and password.
6
Specify the DNS Server1/Server2 IP address.
DVR User's Manual
34