Table of Contents
Advertisement
To restore the router to the factory defaults, click Restore Defaults. This is identical with pressing down the
Reset button on the back panel and holding for 3 seconds. To export the current settings of router to the local PC
for future use, click Save, select an address and save the settings.
To load a file to the router, click Browse to choose a configuration file on your PC and click Restore.
When you load new configuration, the original configuration will be lost. Please
back up the current configuration before loading a new one. In this way, if the new
configuration file has an error, you can load the backup file.
DO NOT
router may be damaged.
5.8.3 Firmware Update
You install new versions of the router's software using this page. From time to time, we may release new
versions of the Router's firmware. Firmware updates contain improvements and fixes to problems that may have
existed. Click the link below to see if there is a new firmware update available for this Router.
Click Utilities Firmware Update and the following page will be displayed.
Figure 5-8-2 Backup Setup
shut down your router when loading a configuration file. Otherwise, the
Figure 5-8-3 Firmware Update
-72-
User Manual of WDRT-1200AC
Advertisement
Table of Contents
